16 - 1 REMOVING THE GAME BOARD
1Turn power off.
2Remove the 2 trusshead screws of the back lid, unlock it, and detach it from the main cabinet.
3Disconnect the connectors of all the wires between the ASSY MAIN BD STD and the main cabinet.
4Disconnect the connectors of all the wires between the shield case's filter board on the ASSY MAIN BD STD and the main cabinet.
5Remove the 2 wing bolts that fix the base (a wooden plate) of the ASSY MAIN BD STD.
WING BOLT (2)
M4 X 25, flat washer used.
Disconnect all the connectors to the filter board.
BACK LID
Unlock.
Disconnect the connector.
ASSY MAIN BD DX
TRUSS SCREW (2) black
M4 X 30
FIG. 16. 1 a
74