Turn the power off.
REPLACING THE VOLUME
TRUSS SCREW (2) | POTENTIOCOVER |
| |
M4 X 8 |
|
1
2Take out the 2 screws and remove the Potentiocover (FIG. 11. 1 c).
3Disconnect the connector of the Volume to be replaced.
4Remove the screw which secures the Potentiobase (FIG. 11. 1 b).
5Remove the Potentiobase together with the Volume as is attached. (FIG. 11. 1 c)
6Remove the Base and Gear to replace the Volume.
7Adjust the Volume as per the previous
page after replacing.
FIG. 11. 1 c
11 - 2 GREASING
POTENTIOBASEÅ@
STOP
IMPORTANT
Be sure to use the designated grease. Using undesignated grease can cause parts damage.
Once every 3 months, apply greasing to the Spring and Gear mesh portion. For spray greasing, use GREASE MATE (PART No.
GREASING
FIG. 11. 2
61