Honeywell HJZTP Section DVR Control Functions, DVR Mode, Number Entry for Entering Passwords

SECTION 4:

DVR CONTROL FUNCTIONS

4.1 DVR MODE

Press the ‘mode’ key to toggle between multiplexer and DVR mode.

4.2 NUMBER ENTRY (FOR ENTERING PASSWORDS)

To send numbers to the DVR, press and hold the ‘Fn’ key, then press the number keys. Alternately, press and hold the ‘F6’ (‘menu’), ‘rw’, ‘ff’, ‘play’, ‘rec’, ‘search’ or ‘alarm’ keys, to send numbers to there password screens.

4.3 DVR MENUS

Press and hold the ‘F6’ (‘menu’) key to bring up the password screen.

Whilst holding the ‘F6’ (‘menu’) key, press the number keys to enter numbers on the password screen.

Press the ‘F5’ (‘enter’) key to enter the password and gain access to the DVR set-up menus.

Navigation around these menus is achieved by using the function keys as indicated in the following table:

Key		Function
F1	(▲)	Up
F2	(▼)	Down
F3	(◄)	Left
F4	(►)	Right
F5	(enter)	Enter
F6	(menu)	Menu

Press the ‘F1’ (‘▲’), ’F2’ (‘▼’), ‘F3’ (‘◄’) or ‘F4’ (‘►’) keys to move around the menu pages.

Press the ‘F5’ (‘enter’) key to select an option within the menus.

Press the ‘F6’ (‘menu’) key to exit the current menu. (If the user presses ‘F6’ when in the‘set-up screen’, the DVR exits the menus and returns to normal operation.)

Note: Menus are not accessible to users logged in as user level 2 (U2 displayed on the LCD).

Rev. 1.01	17	900.0570
		8-Sept-05