Honeywell HJZTPX user manual Recording and Playback, Key Function User Level Required

4.7 RECORDING AND PLAYBACK

The following table indicates the keys used for recording and playback, only the counter function is available to users logged in as user level 2 (U2 displayed on the LCD):

Key	Function	User Level Required
search	Search	U1
play	Play/Pause	U1
rw	Rewind	U1
ff	Fast Forward	U1
stop	Stop	U1
rec	Record	U1
counter	Counter	U1 or U2
Fn + Joystick Right/Left	Shuttle Forwards/Backwards	U1
Fn + Joystick Up/Down	Jog Forwards/Backwards	U1
Fn + rec	Panic	U1

Note: If user password is enabled on the DVR, then pressing the ‘search’, ‘play’, ‘rw’, ‘ff, or ‘rec’, key will cause a user password screen to be displayed. If a user password is required, keep the key (‘search’, ‘play’, ‘rw’, ‘ff, or ‘rec’) pressed whilst entering the password. Alternately, press and hold the ‘Fn’ key, then press the number keys

Press the ‘search’ key to bring up the ‘search’ menu. Press the key again to exit the ‘search’ menu.

Press the ‘counter’ key to toggle the DVR display between displaying or not displaying the remaining storage capacity.

To increase the speed of rewind or fast forward, press the ‘rew’ or ‘ff’ key up to four times to reach the maximum speed. Alternately, if the DVR is in ‘playback’ mode, press and hold the ‘Fn’ key and move the joystick right to play the video forwards or left to play the video backwards. The more the joystick is moved the faster the video is played. If the joystick is returned to the centre position or the ‘Fn’ key is released, the shuttle is returned to the centre position (and the playback is paused).

If the DVR is paused in ‘playback’ mode, press and hold the ‘Fn’ key and move the joystick up to play the video forwards image-by-image or down to play the video backwards image- by-image. If the joystick is held up or down, the video is moved on to the next image (either forwards or backwards) every 0.5 seconds.

Rev. 1.01	19	900.0570
		8-Sept-05