Honeywell HJZTPX user manual Bottom Menu, Full 2x2 3x3 4x4, Pip, Pop Up Menu, User Def1 User Def2

5.2.2Bottom Menu

To enter the multiplexer bottom menu press the ’F2’ (‘▼’), key twice to display:

Full	2x2	3x3	4x4	PIP
User Def1	User Def2	User Def3	User Def4	Cancel

Use the ‘F1’ (‘▲’), ’F2’ (‘▼’), ‘F3’ (‘◄’) or ‘F4’ (‘►’) keys to select the required option, then press ‘F5’ (‘enter’).

5.2.3Pop Up Menu

Pressing the ‘F1’ (‘▲’), ’F2’ (‘▼’), ‘F3’ (‘◄’) or ‘F4’ (‘►’) keys in live screen mode will select a camera image (red border around image). Once the required image has been selected, press the ‘F5’ (‘enter’) to display:

Live Cam Change…

Zoom…

Full

Priority On

Histogram On..

Panic Record On

Freeze On

Sequence

Utilities

Cancel

Use the ‘F1’ (‘▲’), ’F2’ (‘▼’) keys to select the required option, then press ‘F5’ (‘enter’).

5.3PICTURE CONTROL

The following table indicates the keys used for picture control:

Key	Function
display	Display
sequence	Sequence
freeze	Freeze
play	Toggle VCR input
search	Digital Zoom

Press the ‘display’ key to select the next display setting (in the cycle of ‘4x4’, ‘3x3’, ‘2x2’ and ‘PIP’ for a 16 way multiplexer, ‘3x3’, ‘2x2’ and ‘PIP’ for a 9 way multiplexer or ‘2x2’ and ‘PIP’ for a 4 way multiplexer).

Press and hold the ‘Fn’ key, then press the ‘display’ key to cycle through the other cameras when displaying 2x2 and 3x3 displays.

Press the ‘sequence’ key to put the multiplexer output into a sequence (the sequence depends on the current display mode and set-up). If the key is pressed again, the sequence stops (displaying the current step in the sequence).

Press the ‘freeze’ key to freeze the current display. Press the key again to return to the ‘live’ picture(s).

Rev. 1.01	22	900.0570
		8-Sept-05