4.4 PICTURE CONTROL
The following table indicates the keys used for picture control:
Key | Function |
display | Display |
sequence | Sequence |
freeze | Freeze |
Press the ‘display’ key to select the next display setting (in the cycle of ‘4x4’, ‘3x3’, ‘2x2’ and ‘PIP’).
Use the F3 (◄) and F4 (►) keys to cycle through the other cameras when displaying 2x2 and 3x3 displays.
The screen layout of the
Press the ‘sequence’ key to put the DVR output into a sequence (the sequence depends on the current display mode and
Press the ‘freeze’ key to freeze the current display. Press the key again to return to the ‘live’ picture(s).
4.5 CAMERA SELECTION
Press one or two of the number keys (to enter a legal camera number) followed by the ‘camera’ key to select that number camera for
Press the ‘camera’ key by itself to increment the camera selection by one.
Note: Both of the above selection processes also make the displayed camera the controlled camera as shown on the keyboards LCD display. The controlled camera can be changed independently of the DVRs displayed camera(s) by putting the keyboard in PTZ mode. To enable/disable PTZ mode, press and hold the ‘Fn’ key , then press the ‘mode’ key. When in PTZ mode the PTZ LED will be on
4.6DVR SELECTION
Pressing a number followed by the ‘Fn’ key selects a DVR to control. This also selects the last camera controlled on that DVR (or the first camera input on that DVR if it has not been selected previously).
Rev. 1.01 | 18 | 900.0570 |
|
|