Logical Solutions SCS-R manual Initial Configuration, Default Configuration

SECURE CONSOLE SERVERS Default Configuration

4 Initial Configuration

It’s Pre-Configured. Set your IP Address. Just Add Users.

4.1 Default Configuration

Out of the box, the SCS is pre-configured, ready to generate ssh keys, and has an IP address set to a generic default value of 10.9.8.7 / NetMask 255.0.0.0. It is likely that the sysadmin will want to change from this default IP address to your local IP information. The sysadmin will only need to add user information specific to his site.

Note

The default IP address of the SCS is 10.9.8.7, with a default subnet mask of 255.0.0.0.

When you first connect the unit to your network and turn the power on, it will take about two minutes for the SCS to perform the initial ssh host key generation. The front panel display will show the following display after the SCS’s power-up is complete and the system is ready.

Figure 4.1 SCS Front Panel Display, default, normal mode shown

scs.localdomainname

Tue Mar 18 15:53:03 2003

The top line of the display is the SCS’s network and domain name, while the sec- ond line is a clock display showing day and date (initially set to Eastern Time Zone).

tel (203) 647-8700 Page 29 Product Manual - MAN-000001C