SECURE CONSOLE SERVERS | Front Panel Network Setup |
Figure 4.8 SCS Front Panel Display, editing the Net Mask setting
Edit Net Mask | * |
255.200.000.000 |
|
|
|
As soon as you change a digit, an asterisk (*) will appear to the right on the top line, indicating that a parameter has changed. Change the Net Mask as desired.
Note
Ignore any leading 0’s in the display entry. The SCS will adjust for them and will not store the leading zeroes when saving the data.
When you have the complete parameter value as it should be, press the 'ENTER' button to complete the entry. The display will show the following:
Figure 4.9 SCS Front Panel Display, showing the new Net Mask display
Net Mask 255.255.000.000
Your new value will be stored when you are finished setting all the Network param- eters.
Gateway
Now, enter your Gateway parameter information. Press the Down Arrow once to continue.
Figure 4.10 SCS Front Panel Display, showing the current Gateway setting
Gateway 010.001.002.003
Press the ENTER button to edit the Gateway parameter. The current Gateway set- ting will be displayed, with a cursor under the first digit.
tel (203) | Page 37 | Product Manual - |