Logical Solutions SCS-R manual Start Front Panel Edit Mode

Page 34

Initial Configuration

Note

Use the ENTER button to ‘continue’ or to ‘accept current setting’, whichever is appropriate at that time.

Your front-panel entries must be no longer than 30 seconds apart, or the front panel entry program will time out and discard any of your entries. An asterisk to the far right indicates there is a parameter that has changed from the currently-stored value. Your entries will be accepted and held; then, as you are exiting this programming mode, you are given the opportunity to Save or Cancel your new changes. If you do not Save your settings at this time, your new changes will be discarded.

Note

Front panel changes are not written to the Compact Flash memory until the sysadmin uses the command-line ‘save’ command. There- fore, do NOT turn the system power off or these changes will be lost.

4.4.1.1 Start Front Panel Edit Mode

To start the Edit mode, press the UP or DOWN Arrow button on the front panel. The display will change from the default Domain Name / Date & Time to the Edit Mode. This mode will time out after 30 seconds, and revert to the normal display.

Figure 4.6 SCS Front Panel Display, showing first Edit Mode display

Press Enter to

Program Network Settings

You can scroll through the Edit functions (plus the normal display) that are avail- able by pressing the UP or DOWN arrows:

•Program Network Settings

•View SCS Settings

Note

If you do not press any buttons, the display will revert to the normal display in approximately 30 seconds, and no changes will be made.

Stop scrolling when you reach the Program Network Settings display.

SCS160 / SCS320 / SCS480	Page 34	www.thinklogical.com
SCS160R / SCS320R

Image 34

Contents Product Manual SCS and SCS-R ModelsCopyright Notice Product Overview Initial Configuration Commands Administering Users Regulatory & Safety File System Introduction SCS Models Covered in this ManualSystem Features IntroductionSoftware Features Hardware Features1 SCS160R / SCS320R Hardware SCS480, 48-Port Secure Console Server, front and rear viewsTechnical Specifications TCP/IPSCS320R, showing front and rear views Product Overview Intended Application1 SCS160 / SCS320 / SCS480 System Chassis2 SCS160R / SCS320R Serial Devices Connecting to the SCSBreak Safe 3.1 SCS160 / SCS320 / SCS480 AC PowerIP Network 3.2 SCS160R / SCS320RPort Buffers User Access ControlUser Sessions For Your Notes Mounting the SCS InstallationRack Mount or Desktop Front Panel Display and Buttons PowerConnections 3 It’s Convection CooledConnect your Console Connecting to the Network Port3.1 SCS160R / SCS320R Dual NIC Interface 4.1 SCS160R / SCS320R Dual Console Interface Connect to the PortsPort Adapters Serial Port Pinout PinSCS160R / SCS320R Power Modules Left Supply Failed Tue Mar 18 154307Secure Console Servers SCS160R / SCS320R Power Modules AC Power Module ReplacementReplacing an AC Module Left Module shown partially removed Initial Configuration Default ConfigurationNetwork Connection Requirements Initial System Security ConcernsInitial Connection via Network Route via Linux workstationRoute via Windows workstation From a DOS prompt, enterPuTTY Configuration Screen Front Panel Network Setup Front Panel Edit ModeStart Front Panel Edit Mode SCS Front Panel Display, showing first Edit Mode displayProgram Network Network IP AddressEdit IP Address 192.168.075.239 Net MaskEdit Net Mask 255.200.000.000 GatewayEdit Gateway Exit to Main MenuExit to Main Menu For Your Notes Linux General Public License System AdministrationSCS Systems are Linux-based Understanding LinuxConnect using a Terminal Initial Sysadmin AccessSCS System Architecture Log In as root Enter CommandsLog Out Default Services Configure the ServicesConfigure the Services For Your Notes Commands System CommandsSave Command RebootPoweroff Other Linux CommandsSsh-keygen SftpSsh SttyChange Logging Level VersionsFor Your Notes Security Change Network AddressRun netconfig Example of netconfig fill-in fields More Than One NameserverChange Hostname Time ConfigurationChange NIC Speed Configure Authentications Front Panel Display OptionsEdit Display Mode ParametersView LINE2 Network Time ServiceLINE1 Display OFFConfigure NTP Start the NTP ServiceNIS and User Port Permissions Changing Serial Port settingsUser Port Control NIS Port Access WhereNIS Database file User Names and GroupsGroup Permissions NIS Make file NIS Configuration File10 NFS Remote NFS DirectorySyslog SnmpStart Snmp Timeouts Administering Users User SetupEdituser Other Editing CommandsAdduser DeluserEditbrk name Editesc nameFor Your Notes SCS Users User OperationsUser Accounts Root userPort Identities What Can a User DoEscape Sequence Break SequenceEditbrk Edit Escape Sequence Symbols found on the Product Regulatory & SafetySafety Requirements Product Serial NumberEuropean Union Regulatory ComplianceNorth America Declaration of ConformityStandards With Which the Products Comply Supplementary InformationLithium Battery Australia & New Zealand10.7 SCS160R / SCS320R Power Modules For Your Notes Customer Support How to Contact LogicalWebsite Telephone Mail11.1.4 Fax Product Support WarrantyReturn Authorization Our AddressFor Your Notes Appendix a File System Read-Only vs. Read-WriteLSI Directories Appendix B FAQ How do I do this?View a Buffer Product Support For Your Notes