Table 7. Settings (continued)
Description | Available Settings | Default Setting |
|
|
|
Charger | [Enabled] [Disabled] | Enabled |
| If Enabled, batteries charge normally. |
|
| If Disabled, the battery charger is off. |
|
|
|
|
Battery Charge % to Restart | [0 %] [10%] [20%] [30%]...[100%] | 0 % |
| When enabled, automatic restart is made when the |
|
| battery charge state reaches the selected level. If set |
|
| to 0, the feature is disabled. |
|
|
|
|
Battery Low Alarm | [Immediate] [2 min] [3 min] [5 min] | 3 min |
| If you select a value, the battery low alarm triggers |
|
| when the set amount of backup time |
|
| (approximately) remains in the batteries. |
|
| If Immediate, the battery low alarm activates at the |
|
| same time as the “UPS on Battery” notice. |
|
|
|
|
Automatic Battery Tests | [Enabled] [Disabled] | Enabled |
| See “Running Automatic Battery Tests” on page 53. |
|
|
|
|
Reset Peak Consumption Watts | [No] [Yes] | No |
| If No, no action. |
|
| If Yes, the Peak Consumption Watts value is |
|
| cleared and the date and time stamp for this |
|
| statistic is set to the current date and time. |
|
|
|
|
Reset Cumulative Consumption | [No] [Yes] | No |
kWh | If No, no action. |
|
|
| |
| If Yes, the Cumulative Consumption kWh value is |
|
| cleared and the date and time stamp for this |
|
| statistic is set to the current date and time. |
|
|
|
|
Operation 45