DCN Wireless Installation and User Instructions Central Devices
en 51
10.6.2.11 To select a parameter
1 Open the correct menu item (refer to 10.6.2.10).
2Turn the knob to move the cursor to the parameter that is shown.
3On the parameter, push the knob. The parameter flashes.
4Turn the knob to go to the applicable parameter.
5 When the display shows the applicable parameter, push the knob to select the parameter. The display shows a cursor.
10.6.2.12 To change the value of a parameter
1Select the applicable parameter (refer to 10.6.2.11).
2 Turn the knob to move the cursor to the value.
3 Push the knob. The value flashes.
4 Turn the knob to go to the value.
5 When the display shows the correct value, push the knob to select the value. The display shows a cursor.
10.6.2.13 To close a menu item
1Turn the cursor to the last character that identifies the menu item.
2Push the knob to close the menu item. The last character and the menu item title flash.
10.6.2.14 To close a sub-menu
1 Turn the cursor to go to the second last character that identifies the menu item.
2Push the knob to close the
10.6.2.15 To close the main menu
1From the main menu, turn the primary knob clockwise to go to the < Back menu item.
2From the < Back menu item, push the knob to go to the Main menu item.
10.6.2.16 Example
For an example, do as follows to change the level of audio input 2 of the central control unit:
Note
Make sure that when you do this example, you start from the Main menu item.
1 Push the knob to open the main menu.
2 Turn the knob to go to 4 Setup ...
3
4 Turn the knob to go to 4D Level.
5 Push the knob to open the menu item.
Bosch Security Systems