DCN Wireless Installation and User Instructions Central Devices
en 64
11.6.3 Carrier
Set the carrier of the wireless access point with the 4Jd WAP menu item. Adjacent systems must have different carriers (refer to figure 11.7) and different system identities (refer to figure 11.6).
figure 11.7: Carriers for adjacent systems
You can change the carrier after you did the initialization of the system (refer to 12.2.2).
Note
When you change the carrier during a discussion or conference, you can cause a short audio disruption.
11.6.4 Power value
The wireless access point has a typical maximum coverage area of 30 m by 30 m. To determine the exact coverage area the coverage test kit can be used. The maximum coverage area of the wireless access point is dependent upon its power (refer to table 11.3). Set the power of the wireless access point with the 4Jd WAP menu item.
table 11.3: Power values
Value | Typical Coverage |
| Area (m) |
High | 30 x 30 |
Medium | 20 x 20 |
Low | 10 x 10 |
Off | 0 |
You can change the power value after you did the initialization of the system (refer to 12.2.2). When you decrease the power value, some wireless devices can show that they cannot find the wireless network (refer to 14.8.6).