DCN Wireless Installation and User Instructions Central Devices
en 73
12.10 Intercom
Note
You can make an intercom device with the
12.10.1 Introduction
To enable the intercom you must first identify the locations of the operator and the chairman.
12.10.3 Location of the chairman
To identify the location of the chairman:
1Go to the 4Ib Assign menu item of the configuration menu of the central control unit.
2Set the value of the parameter in the menu item to Yes. The display of the central control unit shows:
12.10.2 Location of the operator
To identify the location of the operator:
1Select the 4Ia Assign menu item of the configuration menu of the central control unit.
2Set the value of the parameter in the menu item to Yes. The display of the central control unit shows:
3Lift the receiver of the intercom handset of the operator to identify the location of the operator. When the central control unit identifies the location, the display of the central control unit shows:
3Lift the receiver of the intercom handset of the chairman to identify the location of the chairman. When the central control unit identifies the location, the display of the central control unit shows: