HP J3250M manual Verifying Installation of the Manager Product Set, Monitor HP Hub/Switch

Running HP Hub & Switch Management

Verifying Installation of the Manager Product Set

prevent jobs from stopping, you may want to redirect messages to a temporary file. To run ovw in the background and to redirect error messages to a temporary file, type

ovw > /tmp/ovw.log 2>&1 &

This starts up the entire product set you have installed. The graphical network map will be generated in a window, with the HP Hub & Switch Management menu items available in the pull-down menus from the menu bar.

For more information, refer to the HP OpenView Network Node

Manager Reference and the various man pages on the processes.

Verifying Installation of the Manager

Product Set

If the products are installed properly, you should find the menu items associated with HP hubs, bridges, and switches under the “Options” and “Monitor” menus. The Menu items that Hub & Switch Management adds to Network Node Manager are shown in the following table.

Table 4-1.	OpenView Menu Items
OpenView		Menu Item added by	Description
Menu		HP Hub & Switch
		Management
Monitor		HP Hub/Switch	Monitor HP Hub/Switch: Displays a graphical
			control panel (Closeup View) of a selected (IP-
			addressed) HP hub, bridge, or switch.
			SNMP Configuration: Allows you to configure
			the following on the devices that can be
			managed with a browser:
			Thresholds
			Trap Receivers
			Community Names
			Authorized Managers

Running HP Hub & Switch Management

4-3