HP J3250M manual Set Security Policy for Selected Ports hubs only, Intrusion Log hubs only

Setting Up Security for a Device

Set Security Policy for Selected Ports (hubs only)

port will not be disabled when a new address is learned if the setting is Continuous.

Set Security Policy for Selected Ports (hubs only)

You can set the security policy port by port, or by selecting a group of ports. Select one port by clicking on the entry in the Port Security page. To select more than one port, you can Ctrl-click on each port you want to include, or to select a range of contiguous ports, click on the first port in the range, then shift-click on the last port to be included. Click the Set Security Policy for Selected Ports button. Select the parameters that you want to assign.

Figure 8-4. Setting Security Policy for Several Ports

The Intrusion Log (hubs only)

The Intrusion Log page lets you view security intrusions (violations) of a device. The information displayed includes:

■Port - The ports that have detected attempts of unauthorized access.

Setting Up Security for a Device

8-7