HP J3250M manual Performing Diagnostics, Performing a Ping/Link Test

Performing Diagnostics

Performing a Ping/Link Test

9

Performing Diagnostics

Using HP Hub & Switch Management, you can help isolate faults by running device self-tests, Link tests, and Ping tests (IP networks).

Note: For older HP devices that cannot be managed with a Web browser, read the chapter “ Management for Non-Browserable Devices” or see the online help.

This chapter includes information on:

■Performing a Ping/Link Test

■Rebooting a Device

■Resetting a Hub to Factory Default Settings

■Producing a Configuration Report

Performing a Ping/Link Test

You can isolate faults by running Link tests or Ping tests (IP networks). Select the Diagnostics tab and click on the Ping/Link Test button. Choose a test for sending test packets to, or through, a device in order to verify the path between two network devices. In the Destination MAC/IP Address field enter the IP address or MAC address of the device for which you want to test the connection. Specify the number of packets to send and the timeout (in seconds) for each test. Click on the Start button to start the test. Click on the Stop button to stop the test.

Performing Diagnostics

9-1