HP J3250M manual Disable Port, Set Trap Receiver Thresholds

Up Security for a	Device
Setting

Setting Up Security for a Device

Port Security (hubs only)

Note: In order for traps to function, you must also set the trap in the

Thresholds dialog box, as follows:

1.Using the right mouse button, click on the device symbol in the HP Network Node Manager map.

2.Select SNMP Configuration.

3.Select the Thresholds tab and set the thresholds for the traps you are interested in receiving.

4.Select the Trap Receivers tab and set the management stations that can capture traps.

5.Select the Authorized Managers tab and set the management stations that can send and receive SNMP requests for the device.

Figure 8-3. Set Trap Receiver Thresholds

Disable Port

If the Disable Port parameter displays “yes”, the port may be disabled when an unrecognized address is received. Disabling the port depends on the Address Selection parameter that you have chosen. The settings First Heard and Assigned will disable the port if a new address is heard on that port. The

8-6