HP J3250M Diagnose, Depend on the type of device, Snmp requests for this device, Community name

for Non-	Devices
Management	Browserable

Management for Non-Browserable Devices

Overview of Toolbar Functions

Table 11-1. Summary of Toolbar Functions

Icon	Toolbar Button	Description
	Diagnose	Displays a pop-up menu list of device or network
		test functions. The tests that can be performed
		depend on the type of device.
	Security	Displays a tabbed dialog box for configuring
		security:
		• Authorized Managers: The network
		management stations that can send and receive
		SNMP requests for this device.
		• Community Names: Names that are valid for
		SNMP requests to the device or stack of hubs. A
		read and write level are specified for each
		community name.
		• Security Policy: Set global security for all
		devices of the same type on your network.
		• Port Security: Configure Intruder Detection and
		Eavesdrop Prevention for each port.
		• Intrusion Log: View security intrusions for a
		device.
	Enable Port	Enables a selected hub port. If a password is
		assigned to the hub, you must log on to the hub
		before you can change the state of a port.
	Disable Port	Disables a selected hub port. If a password is
		assigned to the hub, you must log on to the hub
		before you can change the state of a port.
	Logoff	Displays a Logoff dialog box. If a hub or bridge has
		a password, you can log off the device to prevent
		configuration changes.
	VLAN	Displays the VLAN Configuration window.
	Configuration

11-6