HP Smart Array Advanced Pack Software manual P700m LEDs, Green CR8 Idle Task

P700m LEDs

LED ID	Color	Name	Comments
1	Amber	CR10: Thermal Alert	This LED is not used.
2	Amber	CR9: System Error	The controller ASIC has locked up and cannot
			process any commands.
3	Amber	CR1: Diagnostics Error	One of the server diagnostics utilities has detected a
			controller error.
4	Amber	CR2: Drive Failure	To determine which drive has failed, check the Fault
			LED of each physical drive connected to the
			controller.
5	Green	CR3: Activity	Port 2 is active.
6	Green	CR4: Activity	Port 1 is active.
7	Green	CR5: Command Outstanding	The controller is working on a command from the
			host driver.
8	Green	CR6: Controller Heartbeat	When the controller is in good health, this LED
			flashes every two seconds.
9	Green	CR7: Gas Pedal	This LED, together with the Idle Task LED (next item),
			indicates the amount of controller CPU activity. For
			more information, see the following table.
10	Green	CR8: Idle Task	This LED, together with the Gas Pedal LED (previous
			item), indicates the amount of controller CPU activity.
			For more information, see the following table.

Gas Pedal LED status	Idle Task LED status	Controller CPU activity level
Off	Flashing	0–25%
Flashing	Off	25–50%
On steadily	Off	50–75%
On steadily	On steadily	75–100%

Component identification 21