6.Open the ejector latches on each side of the DIMM slot. Normally, the cache module is ejected from the DIMM slot. If the module is not ejected automatically, remove the cache module.
CAUTION: When connecting or disconnecting the capacitor pack cable, the connectors on the cache module and cable are susceptible to damage. Avoid excessive force and use caution to avoid damage to these connectors.
7.If the cache module is connected to a capacitor pack, carefully disconnect the capacitor pack cable from the connector on the top of the cache module.
8.If the previous cache module was connected to a capacitor pack, carefully connect the capacitor pack cable to the new cache module.
9.Install the new cache module in the DIMM slot.
10.Close the ejector latches on the DIMM slot.
11.If you removed the controller for access purposes, install the controller.