HP Smart Array Advanced Pack Software manual Specifications common to all controller models

Page 32

Controller

Speed

Supported product

 

 

 

P222

6 Gb/s

ProLiant Gen8 servers*

P420

6 Gb/s

ProLiant Gen8 servers*

P421

6 Gb/s

ProLiant Gen8 servers

P212

6 Gb/s

ProLiant G6/G7 servers

P410

6 Gb/s

ProLiant G6/G7 servers

P411

6 Gb/s

ProLiant G6/G7 servers

P711m

6 Gb/s

ProLiant G6/G7 server blades

P712m

6 Gb/s

ProLiant G6/G7 server blades

P721m

6 Gb/s

ProLiant Gen8 server blades**

P812

6 Gb/s

ProLiant G6/G7 servers

P822

6 Gb/s

ProLiant Gen8 servers†

P400

3 Gb/s

ProLiant G4/G5 servers

P700m

3 Gb/s

ProLiant G4/G5 server blades

P800

3 Gb/s

ProLiant G4/G5 servers and select G6 servers

E500

3 Gb/s

ProLiant G4/G5 servers

*The P222 controller is not supported in the HP ProLiant ML350p Gen8 server. The P420 is not supported in slot 3 or slot 4 of the HP ProLiant ML350p Gen8 server.

**The P721m controller is not supported in expansion slot 1 of HP ProLiant Gen8 server blades.

The HP P822 Smart Array Controller is not supported in all slots in all HP ProLiant Gen8 servers. See the table below for slots that are not supported, or that require special configuration.

Server

Rules

 

 

DL360e Gen8

P822 supported in slot 1 only

 

Requires Smart Array cable kit part number 672242-B21

 

 

DL380e Gen8

P822 is not supported in PCI slot 4.

DL380p Gen8

P822 is not supported in PCI slot 3.

DL385p Gen8

P822 is not supported in PCI slot 3.

ML350p Gen8

P822 is not supported in slots 1, 2, 5, 6, 7, 8, or 9.

 

When installing P822 in slot 3, slot 4 cannot be populated.

 

 

ML350e Gen8

P822 supported in slot 2 only

For more information on installing the controller, see the server user guide.

For the latest support information, see the controller QuickSpecs on the HP website

(http://h18000.www1.hp.com/products/quickspecs/ProductBulletin.html). At the website, choose the geographic region, and then locate the product by name or product category.

Specifications common to all controller models

This section describes the most commonly referenced controller features. For other features, specifications, and information about system requirements, see the HP website (http://www.hp.com/products/smartarray). To get the full benefit of all controller features, be sure that the controller is loaded with the latest firmware.

Feature

Details

 

 

Temperature range

Operating, 10° to 55°C (50° to 131°F)

 

Storage, -30° to 60°C (-22° to 140°F)

Specifications 32

Image 32
Contents Abstract Part Number August EditionPage Contents Installation and configuration Regulatory compliance notices Moving drives and arrays Adding drivesComponent identification Controller componentsP212 components DescriptionFor LED locations and status, see P222 LEDs on Description P400 components model with front connectorsP222 components P400 components model with back connectors P410 components P411 componentsP420 components For LED locations and status, see P420 LEDs on DescriptionFor LED locations and status, see P421 LEDs on Description P421 componentsE500 components P700m components P711m components P712m componentsFor LED locations and status, see P721m LEDs on P721m componentsP800 components P812 components Controller board runtime LEDs P822 componentsP212, P410, and P411 LEDs Color Name CommentsE500 and P400 LEDs Idle Task LED status Controller CPU activity levelColor Name Interpretation P222 LEDsP420 LEDs P421 LEDs P700m LEDs Green CR8 Idle TaskP711m LED P712m LEDP721m LEDs P800 LEDsCannot function due to an internal problem. If P812 LEDs Fbwc module LEDs P410, P411, P711m, P812 Fbwc module LEDsP822 LEDs Fbwc module LEDs P222, P420, P421, P721m, P822 Green LED Amber LED InterpretationColor Description Battery pack LEDsAmber Green Interpretation LED3 pattern LED4 pattern Interpretation Specifications Memory and storage capacity conventionsRAID conventions Smart Array Advanced PackSupported servers and server blades Required hardwareSpecifications common to all controller models Feature DetailsController Speed Supported product Server RulesSpecification E500 P411 P421 Controller specifications by modelE500, P411, and P421 specifications P400, P410, and P420 specifications P212 and P222 specificationsSpecification P400 P410 P420 Specification P212 P222P700m, P711m, P712m, and P721m specifications P800, P812, and P822 specificationsSpecification P700m P711m P712M P721m Specification P800 P812 P822Battery pack service life Installing a stand-up controller in an unconfigured server Installation and configurationProcedures for controllers in a server Installing the controller board Connecting internal storage Procedures for controllers in a server blade SAS cable part numbersInstallation and configuration Installing the mezzanine controller board Configuration tools Option ROM Configuration for ArraysArray configuration tools ROM-Based Setup UtilityUpdating firmware System maintenance toolsInstalling device drivers Event Notification Service HP Insight Diagnostics Diagnostic toolsInstalling Management Agents Installation and configuration Upgrade and replacement procedures Replacing the battery on the P212, P410, and P411 modelsReplacing the Fbwc module on the P410 and P411 models Replacing the Bbwc module on the P212, P410, and P411 models Upgrade and replacement procedures Upgrade and replacement procedures Installing an E500 or P400 cache battery Replacing an E500 or P400 cache battery Replacing the E500 or P400 cache Replacing the P700m cache battery Upgrade and replacement procedures Upgrade and replacement procedures Removing a P711m capacitor pack Replacing a P711m cache module Upgrade and replacement procedures Upgrade and replacement procedures Replacing a P712m cache module Replacing the Fbwc module on the P721m Replacing a P800 cache battery Upgrade and replacement procedures Upgrade and replacement procedures Upgrade and replacement procedures Upgrade and replacement procedures Replacing the P800 cache module or controller Upgrade and replacement procedures Upgrade and replacement procedures Replacing a P812 cache module Upgrade and replacement procedures Upgrade and replacement procedures Upgrade and replacement procedures Replacing a P822 cache module Upgrade and replacement procedures Drive procedures Identifying the status of a legacy driveIdentifying the status of an HP SmartDrive Status DefinitionRecognizing drive failure Effects of a drive failureReplacing drives Compromised fault toleranceRecovering from compromised fault tolerance Automatic data recovery rebuild Before replacing drivesTime required for a rebuild Abnormal termination of a rebuild Upgrading drive capacity Restore data from backupMoving drives and arrays Adding drives Drive procedures Grounding methods to prevent electrostatic discharge Electrostatic dischargePreventing electrostatic discharge Regulatory compliance notices Federal Communications Commission noticeFCC rating label FCC Notice, Class a EquipmentCanadian notice Avis Canadien ModificationsCables European Union regulatory notice Bsmi noticeBattery replacement notice Chinese noticeJapanese notice Korean notice Class a equipmentTaiwan battery recycling notice Acronyms and abbreviations HP Service Pack for ProLiant System Management HomepageDocumentation feedback Index CpqonlinFederal Communications Commission FCC Smart Array Advanced Pack Saap