HP Smart Array Advanced Pack Software manual P700m, P711m, P712m, and P721m specifications

Page 35

Specification

P212

P222

 

 

 

Maximum power required

12 W

14 W

(approximate)

 

 

RAID levels

RAID 0, 1, 1+0, 5, 50, 6, and 60

RAID 0, 1, 1 (ADM), 1+0, 10 (ADM), 5,

 

 

50, 6, and 60

 

 

 

Battery kit option part

462969-B21

number

 

 

Cache module

40-bit wide, 256-MiB BBWC

40-bit wide, 512-MiB FBWC

I/O connection to the

PCIe 2.0 x8 edge connector

PCIe 3.0 x8 edge connector

system board

 

 

*These dimensions exclude the board bracket.

**RAID levels 5 and 50 require an installed cache module. RAID levels 1 (ADM), 10 (ADM), 6, and 60 require an installed cache module and SAAP. To download SAAP, see the HP website (http://www.hp.com/go/SAAP).

P700m, P711m, P712m, and P721m specifications

Specification

P700m

P711m

P712M

P721m

 

 

 

 

 

Board type

Type A, 4-port, PCIe

Type A, 4-port, PCIe

Type A, 4-port, PCIe

Type B, 4-port, PCIe

 

mezzanine board

mezzanine board

mezzanine board

mezzanine board

Dimensions, cm

11.3 x 10.0 x 2.0

11.3 x 10.0 x 2.0

11.3 x 10.0 x 2.0

11.3 x 10.0 x 2.0

Dimensions, in

4.5 x 4.0 x 0.8

4.5 x 4.0 x 0.8

4.5 x 4.0 x 0.8

4.5 x 4.0 x 0.8

Maximum number of

108 external

108 external

10 internal + external

227 external

physical drives

 

 

 

 

Maximum power

9.30 W

14 W

14 W

14 W

required (approximate)

 

 

 

 

RAID levels

RAID 0, 1, 1+0, and 5;

RAID 0, 1, 5, 6, 50,

RAID 0 and 1

RAID 0, 1, 1 (ADM),

 

with battery, also RAID

and 60

 

1+0, 10 (ADM), 5,

 

6

 

 

50, 6, and 60*

 

 

 

 

 

Battery kit option part

453779-001

number

 

 

 

 

Cache module

40-bit wide, 256-MiB

72-bit wide, 1-GiB

40-bit wide, 256-MiB

40-bit wide, 512-MiB

 

BBWC

FBWC**

BBWC

FBWC

 

72-bit wide, 512-MiB

(112 MiB is used by

 

72-bit wide, 2-GiB

 

BBWC

the onboard

 

FBWC†

 

(64 MiB is used by the

processor)

 

(controller does not

 

onboard processor)

 

 

operate without

 

 

 

 

cache)

 

 

 

 

 

I/O connection to the

Grid array mezzanine

Grid array mezzanine

Grid array

Grid array

system board

connector

connector

mezzanine connector

mezzanine connector

*RAID levels when using the 2-GiB FBWC. When using the 512-MiB FBWC, RAID levels are dependent on the attached arrays.

**SAAP 1.0. License key is standard.

† SAAP 2.0. License key is standard.

P800, P812, and P822 specifications

Specification

P800

P812

P822

 

 

 

 

Board type

Full-size, PCIe stand-up

Full-size, PCIe stand-up

Full-height, 1/2 length, PCIe

 

board

board

stand-up board

Specifications 35

Image 35
Contents Part Number August Edition AbstractPage Contents Installation and configuration Moving drives and arrays Adding drives Regulatory compliance noticesDescription Component identificationController components P212 componentsFor LED locations and status, see P222 LEDs on Description P400 components model with front connectorsP222 components P400 components model with back connectors P411 components P410 componentsFor LED locations and status, see P420 LEDs on Description P420 componentsFor LED locations and status, see P421 LEDs on Description P421 componentsE500 components P700m components P712m components P711m componentsFor LED locations and status, see P721m LEDs on P721m componentsP800 components P812 components P822 components Controller board runtime LEDsColor Name Comments P212, P410, and P411 LEDsIdle Task LED status Controller CPU activity level E500 and P400 LEDsColor Name Interpretation P222 LEDsP420 LEDs P421 LEDs Green CR8 Idle Task P700m LEDsP712m LED P711m LEDP800 LEDs P721m LEDsCannot function due to an internal problem. If P812 LEDs Fbwc module LEDs P410, P411, P711m, P812 Fbwc module LEDsP822 LEDs Green LED Amber LED Interpretation Fbwc module LEDs P222, P420, P421, P721m, P822Color Description Battery pack LEDsAmber Green Interpretation LED3 pattern LED4 pattern Interpretation Smart Array Advanced Pack SpecificationsMemory and storage capacity conventions RAID conventionsRequired hardware Supported servers and server bladesServer Rules Specifications common to all controller modelsFeature Details Controller Speed Supported productSpecification E500 P411 P421 Controller specifications by modelE500, P411, and P421 specifications Specification P212 P222 P400, P410, and P420 specificationsP212 and P222 specifications Specification P400 P410 P420Specification P800 P812 P822 P700m, P711m, P712m, and P721m specificationsP800, P812, and P822 specifications Specification P700m P711m P712M P721mBattery pack service life Installing a stand-up controller in an unconfigured server Installation and configurationProcedures for controllers in a server Installing the controller board Connecting internal storage SAS cable part numbers Procedures for controllers in a server bladeInstallation and configuration Installing the mezzanine controller board Option ROM Configuration for Arrays Configuration toolsROM-Based Setup Utility Array configuration toolsUpdating firmware System maintenance toolsInstalling device drivers Event Notification Service HP Insight Diagnostics Diagnostic toolsInstalling Management Agents Installation and configuration Replacing the battery on the P212, P410, and P411 models Upgrade and replacement proceduresReplacing the Fbwc module on the P410 and P411 models Replacing the Bbwc module on the P212, P410, and P411 models Upgrade and replacement procedures Upgrade and replacement procedures Installing an E500 or P400 cache battery Replacing an E500 or P400 cache battery Replacing the E500 or P400 cache Replacing the P700m cache battery Upgrade and replacement procedures Upgrade and replacement procedures Removing a P711m capacitor pack Replacing a P711m cache module Upgrade and replacement procedures Upgrade and replacement procedures Replacing a P712m cache module Replacing the Fbwc module on the P721m Replacing a P800 cache battery Upgrade and replacement procedures Upgrade and replacement procedures Upgrade and replacement procedures Upgrade and replacement procedures Replacing the P800 cache module or controller Upgrade and replacement procedures Upgrade and replacement procedures Replacing a P812 cache module Upgrade and replacement procedures Upgrade and replacement procedures Upgrade and replacement procedures Replacing a P822 cache module Upgrade and replacement procedures Identifying the status of a legacy drive Drive proceduresStatus Definition Identifying the status of an HP SmartDriveEffects of a drive failure Recognizing drive failureReplacing drives Compromised fault toleranceRecovering from compromised fault tolerance Before replacing drives Automatic data recovery rebuildTime required for a rebuild Abnormal termination of a rebuild Upgrading drive capacity Restore data from backupMoving drives and arrays Adding drives Drive procedures Grounding methods to prevent electrostatic discharge Electrostatic dischargePreventing electrostatic discharge FCC Notice, Class a Equipment Regulatory compliance noticesFederal Communications Commission notice FCC rating labelCanadian notice Avis Canadien ModificationsCables Bsmi notice European Union regulatory noticeClass a equipment Battery replacement noticeChinese notice Japanese notice Korean noticeTaiwan battery recycling notice Acronyms and abbreviations System Management Homepage HP Service Pack for ProLiantDocumentation feedback Cpqonlin IndexFederal Communications Commission FCC Smart Array Advanced Pack Saap