HP Smart Array Advanced Pack Software manual P812 LEDs

P812 LEDs

Item	Color	Name	Comments
1	Green	CR76: Idle Task	This LED, together with the Gas Pedal LED
			(following item), indicates the amount of controller
			CPU activity. For more information, see the
			following table.
2	Green	CR75: Gas Pedal	This LED, together with the Idle Task LED (previous
			item), indicates the amount of controller CPU
			activity. For more information, see the following
			table.
3	Green	CR74: Heartbeat	When the controller is in good health, this LED
			flashes every 2 seconds.
4	Green	CR73: Pending Command	The controller is working on a command from the
			host driver.
5	Green	CR72: Port 1 Activity	Port 1 is active.
6	Green	CR 71: Port 2 Activity	Port 2 is active.
7	Amber	CR78: Drive Failure	To determine which drive has failed, check the Fault
			LED of each physical drive connected to the
			controller.
8	Amber	CR77: Diagnostics Error	One of the server diagnostics utilities has detected
			a controller error.
9	Green	CR82: MIPS ready	The embedded SAS expander is active.

Gas pedal LED status	Idle task LED status	Controller CPU activity level
Off	Flashing	0–25%
Flashing	Off	25–50%
On	Off	50–75%
On	On	75–100%

Component identification 25