The Server Power table contains (all values in Watts):
•Present Power Reading—The current power being consumed by the host.
•Average Power Reading—The average measured power reading for the specified time period. If the server has not been running for the specified time period, the value is the average of all readings since the server was booted.
•Minimum Power Reading—The least measured power reading for the specified time period. If the server has not been running for the specified time period, the value is the minimum reading since the server was booted.
•Maximum Power Reading—The highest measured power reading for the specified time period. If the server has not been running for the specified time period, the value is the highest reading since the server was booted.
DIMMs
The DIMMs table contains, for each DIMM socket:
•Socket—The label and location of the DIMM on the motherboard.
•Size—The DIMM capacity in MB.
•Speed—The DIMM speed in MHz.
CPU Information
The CPU Information table contains, for each CPU socket:
•Socket—The label of the CPU socket.
•Speed—The CPU speed in MHz.
•Cores—The number of CPU cores and threads in this socket.
•Memory—The memory architecture of the socket.
Power Supplies (ML/DL only)
The Power Supplies table contains, for each supply:
•Status—On or Off.
•Location—The bay in which the power supply is located. On Gen8 systems, the Power Supply table also contains:
•Capacity—The total number of watts the power supply can provide.
•Serial Number—The HP power supply serial number.
•Part Number—The HP power supply part number.
•Spare Part Number—The HP power supply spare part number.
Fans (ML/DL only)
The Fans table contains, for each fan:
•Status—On or Off.
•Zone—The general area (zone) within the server chassis that the fan is intended to cool.
•Location—The Fan’s location within the enclosure.
•Speed—The current fan speed (as a percent of maximum speed).
Temperature Sensors
The Temperature Sensors table contains, for each sensor:
•Status—The current status of the sensor.
•Zone—The general area (zone) where the sensor is located.