Configuring HP FTAM/9000
Configuration Parameters
Maximum number of associations
| 50 |
Description | This required parameter sets the number of |
| connections that the local FTAM Responder can |
| service at any one time. |
Format | decimal number |
Valid value | 1 to 100 |
Default value | 50 |
FTAM Remote Responder Parameters
Remote responder’s alias
Description | This parameter is the hostname of the remote node. It is |
| used by ftam, fcp, and other FTAM applications to |
| identify the system that a file is to be copied from or to. |
| This parameter is then inserted into a Directory |
| Distinguished Name (DDN), as shown in the following |
| example. |
Example | With an alias value of myhostname, the DDN of the |
| local responder becomes the |
| following:/O=org_name/OU=org_unit/OU=myhostname/ |
| AP=ftam/AE=resp |
Format | alphanumeric character string |
Valid value | any string of ASCII characters |
Default | none |
value |
|
NOTE | The Presentation, Session, and Transport selectors, along with the list of |
| remote systems NSAPs, are combined to form the Remote Responder's |
| Presentation Address. |
|
|
26 | Chapter 2 |