HP UX 11i v2 Networking Software manual Following T-Selectors are reserved and cannot be used here

		Configuring HP FTAM/9000
		Additional Configuration Parameters
	The following T-Selectors are reserved and cannot be used here.
WARNING
	435F626F677573, 52454C4159, 323236, 323332, 323338, 323430,
	323432, 323434. There are also two reserved default P-Addresses.
	0001.0001.0001 and 0002.0002.0002.
	The NSAP portion of the Presentation Address is the NSAP configured
	for the local node and is added automatically by the configuration
	program.
	ae_objid This object ID may optionally be sent by an application or
	service during connection establishment, and may be used
	for security or authentication purposes by non-HP
	equipment. If the other equipment does not require this
	object ID, no object ID should be configured. Globally unique
	object IDs are assigned by CCITT and/or ISO; a private
	organization can assign its own.
	FORMAT	ASCII string
	UNIT	NA
	RANGE	Elements of the object ID are separated by
		periods. For example, 2.5.4.29
	DEFAULT	none
	OSICONF	no
	DYNAMIC	yes
	SCREEN	NA
	FIELD	NA

ae_max_active_invoke This parameter sets the number of times this AE Title may be used by an FTAM application. This is important when the application is being used by multiple users simultaneously.

Chapter 2 49