Configuring HP FTAM/9000
FTAM Parameters: ftam_parms
FTAM Parameters: ftam_parms
The following group of parameters are used by the FTAM applications running on the local node. These parameters are located in the ftam_parms file.
ft_qos This parameter allows you to configure the class of error recovery for all FTAM connections. A list of the FTAM error classes follows.
FT_NO_RECOVERY 0
FT_CLASS_1_RECOVERY 1
FT_CLASS_2_RECOVERY 2
FT_CLASS_3_RECOVERY 3 (not supported)
If the unsupported class 3 is configured, the class of 2 will be used instead.
FORMAT | decimal number |
UNIT | FTAM error class identifier |
RANGE | 0, 1, 2, 3 |
DEFAULT | 0 |
OSICONF | no |
56 | Chapter 2 |