HP UX 11i v2 Networking Software manual Number of times to attempt recovery

Page 58

Conﬁguring HP FTAM/9000

FTAM Parameters: ftam_parms

ft_no_of_recovery This parameter allows you to conﬁgure the number of recoveries that will be attempted on each ﬁle transfer. This will prevent looping of the recovery procedure. The value is only used if the ft_qos error class is set to 1 or 2.

FORMAT	decimal number
UNIT	number of times to attempt recovery
RANGE	1 - 99999
DEFAULT	5
OSICONF	no
DYNAMIC	yes
SCREEN	NA
FIELD	NA

ft_recovery_timer This parameter allows you to conﬁgure the time of delay required for the local FTAM responder to recover, before the recovery procedure begins. The timer is sent back to the FTAM initiator via the F-RECOVER response. The FTAM initiator will retry with an F-RECOVER request after the timer has expired. The value is only used if the ft_qos error class is set to 1 or 2.

FORMAT

decimal number

UNITseconds

RANGE 0 - 3600

58

Chapter 2

Image 58

Contents Installing and Administering HP FTAM/9000 B1033-90034 HP 9000 Networking E0597Legal Notices Page Page Printing History Page Audience PrefacePurpose Related TasksConventions Related Documents For More Information ReadNotation Description Contents Verifying HP FTAM/9000 Installing HP FTAM/9000 Installation Overview Before You Begin the InstallationFunction Keys To Install HP FTAM/9000 Swinstall ProcedureConﬁguring HP FTAM/9000 Conﬁguration Overview Conﬁguration Worksheets Ftam Initiator Worksheet Ftam Responder Worksheet Ftam Remote Responder Worksheet Conﬁguration Parameters Ftam Initiator ParametersOrgunit Ftam Ftam Responder Parameters Myhostname0001 Ftam Remote Responder Parameters Conﬁguration Parameters Conﬁguration Parameters HP FTAM/9000 Conﬁguration To begin Ftam conﬁgurationTo conﬁgure the Ftam Initiator Ftam Conﬁguration ScreenTo conﬁgure the Ftam Responder View/Modify Ftam Initiator ScreenTo conﬁgure the Ftam Remote Responder View/Modify Ftam Responder ScreenAdd Remote Responder Screen To start/update OTS and HP Ftam OTSStarting the Ftam Responder at System Startup FTAMSTART=onAdditional Conﬁguration Parameters Ftam Local Application Parameters localappAdditional Conﬁguration Parameters Format Parameter has the form Osiconf 435F626F677573, 52454C4159, 323236, 323332, 323338 Following T-Selectors are reserved and cannot be used here323432 Connections/associations Range Default Ftam Responder Responder’s Alias Allows changing OU View/Modify Ftam Responder Unit Ftam Local Applications 0001.0001.0001 Associations/invocations Maximum Number of Inbound Ftam Remote Parameters remoteapp Ftam AE Title Sel.S-sel.T-sel.NSAP1.NSAP2...NSAP8 Add/View/Modify Remote Responder Ftnorecovery FTCLASS1RECOVERY FTCLASS2RECOVERY Ftam Parameters ftamparmsRange Default Osiconf Dynamic Number of times to attempt recovery Maximum number of retries Ftam Parameters ftamconf Localinit Ftam Parameters ftamconf Unitna Range NA Default NA Ftam Parameters ftamconf Ftam Password Types ftampw ﬁlestorepw Verifying HP FTAM/9000 Veriﬁcation Overview To verify the HP FTAM/9000 conﬁguration Ftam Initiator Identiﬁcation Parameters Pop-Up Menu Ftam Destination Presentation Address Pop-Up Menu To verify HP FTAM/9000 operation Index FtamIndex

Related manuals

Manual 175 pages 52.54 Kb

Manual 94 pages 16.8 Kb

Manual 236 pages 18.16 Kb

Manual 12 pages 39.66 Kb

Manual 28 pages 49.76 Kb