HP UX 11i v2 Networking Software manual Sel.S-sel.T-sel.NSAP1.NSAP2...NSAP8

Configuring HP FTAM/9000

FTAM Remote Parameters: remote_app

ae_remote_paddr This parameter is the remote Presentation Address for this application.

FORMAT	ASCII string
UNIT	NA
RANGE	The parameter has the form:
	P-sel.S-sel.T-sel.NSAP1.NSAP2...NSAP8
	where:
	P-sel - Presentation selector (0-32 hexadecimal
	digits)
	S-sel - Session selector (0-32 hexadecimal digits)
	T-sel - Transport selector (0-64 hexadecimal digits)
	Each selector must be an even number of digits.
	Absent selectors (0 length) are treated as nell
	selectors. In this case, the period (.) between
	selectors must still be included. For example 31..30
	indicates a null S-sel, 31.30. indicates a null T-sel.
	NSAP # - Network Address (0-40 hexadecimal
	digits) 1 - 8 NSAPs may be specified. When
	multiple NSAPs are given, the ACSE layer of
	FTAM will attempt to connect with NSAP1. If (and
	only if) the connect fails, will NSAP2 be tried until
	all NSAPs are tried. Omit any unused NSAP slots
	including period(.). For example: 32.31.30.123456
	specifies one remote NSAP, 123456.
DEFAULT	none
OSICONF	yes

54 Chapter 2