HP UX 11i v2 Networking Software manual To start/update OTS and HP Ftam, Ots

Page 34

Conﬁguring HP FTAM/9000

To start/update OTS and HP FTAM

To start/update OTS and HP FTAM

OTS

OTS needs to be started or updated for your conﬁguration changes to take effect. If you chose to update OTS after you ﬁnished the conﬁguration steps in the previous section, you do not need to complete the following OTS steps.

1.At the osiadmin Main menu, select OTS. The OTS menu is displayed.

2.If OTS is not running, select Start OTS. If OTS is running, select Update OTS.

You will see messages on your screen as OTS starts or is updated.

3.Press Return when you are prompted to do so. The OTS menu is displayed.

4.Press Previous Menu f8.

The osiadmin Main menu is displayed. If you did not make conﬁguration changes to the FTAM Responder, you do not need to start HP FTAM. Do not complete the following HP FTAM steps and instead proceed to chapter 3 for HP FTAM/9000 veriﬁcation steps.

HP FTAM

If you made conﬁguration changes to the FTAM Responder, you need to start HP FTAM for your conﬁguration changes to take effect.

1.At the osiadmin Main menu, select FTAM. The FTAM menu is displayed.

2.Select Start FTAM.

You will see messages on the screen as FTAM starts.

3.Press Return when you are prompted to do so. The FTAM menu is displayed.

4.Press Previous Menu f8. The osiadmin Main menu is displayed. Next, you will verify HP FTAM/9000 using the steps in chapter 3.

34

Chapter 2

Image 34

Contents Installing and Administering HP FTAM/9000 B1033-90034 HP 9000 Networking E0597Legal Notices Page Page Printing History Page Audience PrefacePurpose Related TasksConventions Related Documents For More Information ReadNotation Description Contents Verifying HP FTAM/9000 Installing HP FTAM/9000 Installation Overview Before You Begin the InstallationFunction Keys To Install HP FTAM/9000 Swinstall ProcedureConﬁguring HP FTAM/9000 Conﬁguration Overview Conﬁguration Worksheets Ftam Initiator Worksheet Ftam Responder Worksheet Ftam Remote Responder Worksheet Conﬁguration Parameters Ftam Initiator ParametersOrgunit Ftam Ftam Responder Parameters Myhostname0001 Ftam Remote Responder Parameters Conﬁguration Parameters Conﬁguration Parameters HP FTAM/9000 Conﬁguration To begin Ftam conﬁgurationTo conﬁgure the Ftam Initiator Ftam Conﬁguration ScreenTo conﬁgure the Ftam Responder View/Modify Ftam Initiator ScreenTo conﬁgure the Ftam Remote Responder View/Modify Ftam Responder ScreenAdd Remote Responder Screen To start/update OTS and HP Ftam OTSStarting the Ftam Responder at System Startup FTAMSTART=onAdditional Conﬁguration Parameters Ftam Local Application Parameters localappAdditional Conﬁguration Parameters Format Parameter has the form Osiconf 435F626F677573, 52454C4159, 323236, 323332, 323338 Following T-Selectors are reserved and cannot be used here323432 Connections/associations Range Default Ftam Responder Responder’s Alias Allows changing OU View/Modify Ftam Responder Unit Ftam Local Applications 0001.0001.0001 Associations/invocations Maximum Number of Inbound Ftam Remote Parameters remoteapp Ftam AE Title Sel.S-sel.T-sel.NSAP1.NSAP2...NSAP8 Add/View/Modify Remote Responder Ftnorecovery FTCLASS1RECOVERY FTCLASS2RECOVERY Ftam Parameters ftamparmsRange Default Osiconf Dynamic Number of times to attempt recovery Maximum number of retries Ftam Parameters ftamconf Localinit Ftam Parameters ftamconf Unitna Range NA Default NA Ftam Parameters ftamconf Ftam Password Types ftampw ﬁlestorepw Verifying HP FTAM/9000 Veriﬁcation Overview To verify the HP FTAM/9000 conﬁguration Ftam Initiator Identiﬁcation Parameters Pop-Up Menu Ftam Destination Presentation Address Pop-Up Menu To verify HP FTAM/9000 operation Index FtamIndex

Related manuals

Manual 175 pages 52.54 Kb

Manual 94 pages 16.8 Kb

Manual 236 pages 18.16 Kb

Manual 12 pages 39.66 Kb

Manual 28 pages 49.76 Kb