Configuring HP FTAM/9000
FTAM Parameters: ftam_conf
AEQ_enable This parameter decides if the Application Entity Qualifier (AEQ) will or will not be encoded and sent as part of the responding Application Entity Title (AET) in the ACSE Association Request (AARQ) PDU. If it is set to 0, then the called AEQ will not be encoded and sent. If it is set to 1 or if this parameter is not defined, the default action is used. The default action is to encode and send the called AEQ. Also, for this parameter to be used, the called AET should have been defined in the remote_app file.
FORMAT | decimal number |
UNITNA
RANGE 0 - 1
DEFAULT 1
OSICONF no
DYNAMIC yes
SCREEN NA
FIELDNA
64 | Chapter 2 |