Configuring HP FTAM/9000
FTAM Parameters: ftam_conf
local_responder This parameter indicates that the subsequent AEQ_enable parameter specified applies to ftam_responder.
AEQ_enable This parameter decides if the Application Entity Qualifier (AEQ) will or will not be encoded and sent as part of the responding Application Entity Title (AET) in the ACSE Association Response (AARE) PDU. If it is set to 0, then the responding AEQ will not be encoded and sent. If it is set to 1 or if this parameter is not defined, the default action is used. The default action is to encode and send the responding AEQ. Also, for this parameter to be used, the responding AET should have been defined in the local_app file.
FORMAT | decimal number |
UNITNA
RANGE 0 - 1
DEFAULT 1
OSICONF no
DYNAMIC yes
SCREEN NA
FIELDNA
62 | Chapter 2 |