Verifying HP FTAM/9000
Verification Overview
To verify the HP FTAM/9000 configuration
This local connection test is to verify that HP FTAM/9000 is configured correctly.
1.If you are in the osiadmin program, press f8 until the osiadmin Main menu is displayed.
If you exited the osiadmin program after you finished configuring FTAM, you instead need to enter /usr/sbin/osiadmin at the system prompt.
2.Select FTAM.
The FTAM menu is displayed.
3.Select Test Connectivity.
osidiag is loaded, and the FTAM Test Cases menu is displayed .
4.Select Connection Test ...
The FTAM Initiator Identification Parameters
Chapter 3 | 69 |