Example 16 Using addsource to add a source storage system for online data migration
>addsource
>
>showsource
NAME |
| TYPE | UNIQUE_ID | FIRMWARE | MANA |
GEMENT_SERVER | OPERATIONAL_STATE |
|
|
| |
SYMMETRIX+000194901212 | VMAX | xxxxxxxxxxxxxxxx | 5876.229.145 |
|
10.10.10.10Good
3.Using the HP 3PAR Online Import Utility adddestination command, add the destination HP 3PAR StoreServ Storage system.
Example 17 Using adddestination to add the destination storage system for online data migration
>adddestination
>
>showdestination
NAME | TYPE | UNIQUE_ID | FIRMWARE | MANAGEMENT_SERVER | OPER |
ATIONAL_STATE PEER_PORTS |
|
|
|
| |
3par_7200_DCA_01 | 3PAR | 2FF70002AC005F92 | 3.2.1 | 10.10.10.10 | Norm |
al |
4.Zone the host to the HP 3PAR StoreServ Storage system.
5.Configure native
a.If multipath is not already installed, install it.
b.Register HP 3PAR LUN types with native
NOTE: 3PARdata and VV are case sensitive.
c.Register EMC LUN types with native
d.Start native
e.Reload the multipath.conf file.
46 Performing Online Data Migration Using Linux