HP Online Import Software manual Sourcevolume Destinationvolume Taskid Progress

Parameter	Mandatory/Optional	Description
		"testcpg1" -destprov thin
		-migtype MDM
srchost		Name of the host for which all source
		volumes should be considered for
		migration. This should not be there if
		srcvolmap or volmapfile is there.

For VMAX, use the name of the initiator group on the VMAX that contains the initiator WWN that is being migrated. If nested initiator groups are being used, the parent initiator group (which does not have a direct reference to a WWN) cannot be used.

destprov		Provisioning type of the volumes that
		will be created in destination as a result
		of migration (Thin/full).
destcpg		Name of CPG where the migrated
		volumes will be made available.
migtype	Defaults to offline	Migration type. For the source EMC
		Storage system, the supported migration
		type is MDM, except where volumes
		being migrated do not have a host in
		their storage group on the source EMC
		Storage system. This type of migration
		must be offline.
destinationuid	Optional	UID of the destination storage system.
		Since there is a 1:1 mapping, this is an
		optional parameter, as the destination
		will be autoselected.

EXAMPLES

>createmigration -sourceuid 50067890C6E059EE -srchost "HPDL585-01" -destcpg "FC_r5" -destprov thin -migtype MDM

>SUCCESS: Migration job submitted successfully. Please check status/details using showmigration command.

Migration id: 1395864499741
>showmigration -migrationid 1395864499741
MIGRATION_ID	TYPE	SOURCE_NAME			DESTINATION_NAME
START_TIME		END_TIME		STATUS(PROGRESS)(MESSAGE)
1395864499741	MDM	CLARiiON+APM00123452867			3par_7200_DCA_01	Wed Mar 26
13:08:19 PDT 2014	-NA-		preparationcomplete(100%)(-NA-)
>showmigrationdetails -migrationid 1395864499741
SOURCE_VOLUME	DESTINATION_VOLUME		TASK_ID		PROGRESS
OIU_Test_Lun_01	OIU_Test_Lun_01		unknown		0%

The createmigration command example with mixed provisioning type. To create migration with EMC 1 to be thin, but others to be fully provisioned, execute the following command:

createmigration -sourceuid 50067890C6E059EE -srcvolmap [{"EMC_1", thin, "FC_r5"}] -destcpg FC_r5 -destprov full -migtype MDM

createmigration 77