IMPORTANT: In Linux, EMC PowerPath devices are presented as /dev/emcpower* (for example, /dev/emcpowera). EMC PowerPath removal in Linux also removes this device type. This changes when the Linux native
c.If this is for a cluster configuration, initialize the cluster and start cluster services.
d.Start applications.
8.Using the HP 3PAR Online Import Utility, execute the createmigration command with the
-migtype online option.
Example 10 Using createmigration with -migtype online
>createmigration
>SUCCESS: Migration job submitted successfully. Please check status/details using showmigration command. Migration id: 1411673030253
This step admits LUNs presented to the EMC Storage system and exports them to the HP 3PAR host created on the EMC Storage system.
NOTE: Be aware, the createmigration command may take several minutes to complete.
TIP: Make a note of the Migration ID as it will be used in commands to track migration progress.
9.Execute the showmigration command to verify that the data migration task preparation has completed successfully. This may take some time. On the successful creation of the task the STATUS column will indicate preparationcomplete(100%).
>showmigration |
|
|
|
MIGRATIONID |
| TYPE | SOURCE_NAME |
DESTINATION_NAME |
| START_TIME |
|
| END_TIME |
| STATUS(PROGRESS)(MESSAGE) |
1411673030253 |
| online | SYMMETRIX+000194901212 |
3par_7200_DCA_01 |
| Thu Sep 25 | 15: |
23:50 EDT 2014 |
|
10.Execute the showmigrationdetails command to verify the volumes being migrated. In the preparation stage, PROGRESS for each volume will be 0% and the TASK_ID will be unknown.
>showmigrationdetails
SOURCE_VOLUME | DESTINATION_VOLUME | TASK_ID | PROGRESS |
Volume 00145 | Volume_00145 | unknown | 0% |
Volume 00146 | Volume_00146 | unknown | 0% |
> |
|
|
|
42 Performing Online Data Migration Using Linux