HP Online Import Software manual Addsource, Vmax

addsource

DESCRIPTION

The addsource command adds a source storage system to the HP 3PAR Online Import Utility that is intended to be migrated.

PARAMETERS

Parameter	Mandatory/Optional	Description
type	Mandatory	Storage system family name:
		VNX
		CX
		VMAX
		After the following “EXAMPLE” table,
		see the “NOTE” about the type
		parameter in HELP.
name	Optional	Name of the storage system or serial
		number or 64 bit
		hyphenated/non-hyphenated WWN to
		identify the storage system. This is
		required especially when there are
		multiple storage systems managed
		under the same IP address.
uid	Optional	Name of the storage system or serial
		number or 64 bit
		hyphenated/non-hyphenated WWN to
		identify the storage system. This is
		required especially when there are
		multiple storage systems managed by
		the same SMI-S server.
mgmtip	Mandatory	IP address of the SMI-S provider that is
		managing storage system that is being
		added.
user	Mandatory	User name for SMI-S provider that is
		managing storage system that is being
		added.
password	Mandatory	Password for the user of the SMI-S
		provider that is managing the storage
		system being added.
port	Optional	Port number on which management
		application accepts request to connect
		and provide source storage system
		details.
		Mandatory if secure flag is used to set
		non-default.
		SMI-S port defaults are:
		secure port 5989
		unsecure port 5988
secure	Optional	This enables or disables secure channel
		communication with source storage
		system.

74 HP 3PAR Online Import Utility for EMC Storage: Commands