HP 8300 8300 manual Clear a jam at the end of the paper path

Page 61

5.Put the input tray on the ADF. Reload the unscanned pages in the ADF input tray.

6.Resume scanning.

Clear a jam at the end of the paper path

1.Remove any loose pages from the ADF input tray.

2.Gently pull the jammed page out of the ADF in the opposite direction from which the page fed into the ADF.

3.If the jammed page still cannot be removed, lift the lid to its fully open position, loosen the jammed page from the roller on the underside of the lid, and then gently pull the page out of the ADF.

4.Close the ADF lid. Press down firmly on both sides until you hear a click.

5.Re-stack the unscanned pages and reload them into the ADF.

User Guide

59

Image 61

Contents HP Scanjet 8300 series Trademark credits Copyright and licenseContents Contact HP Support Scanner error messages Error Guide HP Scanjet 8300 series UserScanner hardware Automatic document feeder ADFScanner front panel buttons Scanning softwareCustomizable button labels Windows Program Available scanning softwarePurpose Supported OSMacintosh Program Program Purpose Supported OSHP Scanjet 8300 series Setup and Support Guide Where to get additional informationWindows Software How to see if the software is installed Look for the HP Smart Document Scan SoftwareMacintosh users Windows usersButton Disable Utility WIndows AccessibilityHP Scan Pro help Customizable buttons How to use the scanner buttonsWindows Macintosh Windows Program controlling button Customizable buttonFunction Customizable button Customizable button Customizable button Copy buttons Scan Document To buttons Windows HP software installed on the computerButton Settings button Cancel buttonPower Save button User Guide Scan from HP Solution Center How to start a scanScan from the scanner front panel buttons Scan from the HP scanning software WindowsScan from the HP scanning software Macintosh Scan using HP Scan ProScan from the HP Photosmart Software Scan from other software programsScan from HP Photosmart Studio Scan with the automatic document feeder ADF How to scan documentsChoose acceptable paper for the ADF Load originals in the ADFScan one-sided documents from the ADF Windows Program ProcedureScan two-sided documents from the ADF Scan a document for editable text Press customizable button Scan a document as an imageMacintosh Procedure Windows Program Procedure Scan pictures How to scan pictures and filmScan a picture Scan multiple pictures with one scanScan positives such as 35 mm slides Scan filmUser Guide Scan negatives User Guide Windows Place the film templates in the scanner storage slot Make copies Other scanning functionsUser Guide Scan to a destination Send a scan to an e-mail program Save a document or image to a drive or CDFrom the Destination menu, select Text File or Image File HP Photosmart Software Macintosh Do one of the following Change scan settings Open the HP Button Settings Utility Configure the scannerConfigure buttons tab Configure the customizable buttons for document scanningGeneral info tab Configure the customizable buttons for picture scanningHP Smart Document Scan Software scan profiles Assign a profile to a customizable buttonChapter Order maintenance and scanning supplies Care and maintenanceClean the scanner glass Clean and maintain the automatic document feeder ADF Clean the transparent materials adapter TMAUse the cleaning cloth in the ADF Clean the ADF windowUser Guide Clean the feed-roller assembly manually Maintain the ADF Scanner initialization or hardware problems TroubleshootingReset the scanner Scanner has stopped working correctlyCheck the cables Scanner operation problemsCable type ActionScanner lamp stays on Scanner will not turn onScanner does not scan right away Scanned image is fuzzyScanner buttons are not working correctly Buttons do not work Non-HP scanning program opens when a button is pressedClick Scanners and Cameras Slides, negatives, and TMA issues Incorrect colors print, or the image is too light or dark Automatic document feeder ADF problemsDots or streaks appear in the scanned image Scanned images are darkPaper does not feed from the ADF Paper jamming, skewing, misfeeds, or multiple-page feedsBottom of the scanned image is cut off Scanned images have streaks or scratchesClear jams from the ADF An item loaded in the ADF jams repeatedlyClear a jam from the start of the paper path Clear a jam at the end of the paper path Remove a paper jam within the ADF Contact HP Support Replace the feed-roller assemblyError Scanner error messagesClose the ADF lid