HP MSR1000 Router manual

Page 2

Legal and notice information

© Copyright 2014 Hewlett-Packard Development Company, L.P.

No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

i

Image 2
Contents HP MSR1000 Routers Page Contents Page Safety symbols Preparing for installationSafety recommendations General safety recommendationsCleanness Examining the installation siteTemperature and humidity Cooling system ESD preventionLightning protection Rack-mountingRequirements Result Installation accessoriesInstallation checklist Components when observing or moving a removed Requirements Result Installation flowchart Installing the routerInstallation prerequisites Installation flow Mounting the router on a workbench Installing the routerInstalling the router in a rack Marking the positions of cage nuts Page Grounding the router Grounding the router through the rackGrounding the router through the rack Grounding the router with a grounding strip Installing an interface module Installing a SICInstalling a Dsic Removing the filler panelConnecting interface cables Fasten the captive screws to secure the DsicLogging in through the console port Connecting a console cableAttaching a USB device Setting terminal parameters Connection descriptionSetting the serial port used by the HyperTerminal connection HyperTerminal window Powering on the router Connecting an AC power cordVerifying the installation Verifying before power-onPowering on the router Displaying boot informationYou can now configure the router Configuring basic settings for the routerExamining the router after power-on Press Enter, and the following prompt appearsReplacing a Dsic Replacement procedureReplacing a SIC Removing a Dsic System configuration problems TroubleshootingPower supply failure No terminal displayNo response from the serial port Restoring the factory settingsGarbled terminal display ScenarioReset button usage guidelines MSR1002-4 Appendix a Chassis views and technical specificationsChassis views Following figures are for illustration onlyMSR1002-4 MSR1003-8 Technical specificationsMSR1003-8 MSR1002-4 MSR1003-8 LED description Appendix B LEDsPanel LEDs State DescriptionSERIAL0 Appendix C Slot arrangement Related information Support and other resourcesContacting HP Conventions Convention DescriptionNetwork topology icons Index E G I L M N P R S T V W
Related manuals
Manual 8 pages 47.39 Kb