•The console cable is correctly connected, the terminal or PC used for configuration has started, and the configuration parameters have been set.
•If a CF card is used, verify that the CF card is in position.
•Make sure the installed interface modules are in position.
Powering on the router
1.Turn on the switch of the power supply system for the router.
2.Turn on the switch of the AC or DC power modules.
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access
Booting Normal Extend BootWare
The Extend BootWare is
Done!
****************************************************************************
* |
| * |
* | HP MSR1003 BootWare, Version 1.03 | * |
* |
| * |
****************************************************************************
Copyright (c)
Compiled Date | : Aug 22 2013 |
CPU ID | : 0x8 |
CPU L1 Cache | : 32KB |
CPU L2 Cache | : 256KB |
Memory Type | : DDR3 SDRAM |
Memory Size | : 256MB |
Memory Speed | : 667MHz |
Flash Size | : 128MB |
CPLD Version | : 1.0 |
PCB Version | : 2.0 |
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application
............................................................................
The main application file is
............................................................................
............................................................................
.................Done!
System application is starting..................................................
....................................................
24