HP MSR1000 Router Configuring basic settings for the router, Examining the router after power-on

User interface aux0 is available.

Press Enter, and the following prompt appears:

<sysname>

You can now configure the router.

Examining the router after power-on

After the router is powered on, verify that:

•The LEDs on the front panel are operating correctly:

LED	Status	Description
PWR	Steady green	The power module is supplying power correctly.
SYS	Slow flashing green	The router is operating correctly.

•The configuration terminal displays information correctly. For local configuration, the configuration terminal displays the boot information (see "Displaying boot information").

•If you press Enter as prompted after system bootup, the router is ready to configure.

Configuring basic settings for the router

After the router is powered on for the first time, configure the basic settings for the router. For information about configuring the MSR1003-8 router, see HP MSR Routers Fundamentals Configuration Guide (V5) and HP MSR Routers Fundamentals Command Reference (V5). For information about configuring the MSR1002-4 router, see HP MSR Routers Fundamentals Configuration Guide (V7) and HP MSR Routers Fundamentals Command Reference (V7).

25