HP MSR1000 Router manual SERIAL0

Page 39

	LED		State	Description
			Off	No power input.

			Steady green	A link is present.

	SERIAL0		Flashing green	Data is being received or transmitted.

			Off	No link is present.

			Steady green	A 1000 Mbps link is present.
		1000 Mbps
		1000 Mbps	Flashing green	Data is being received or transmitted at 1000 Mbps.
		link LED	Flashing green	Data is being received or transmitted at 1000 Mbps.

			Off	No 1000 Mbps link is present.
			Off	No 1000 Mbps link is present.

	GE		Steady yellow	A 10/100 Mbps link is present.
	10/100
	10/100		Flashing yellow	Data is being received or transmitted at 10/100
		Mbps link		Data is being received or transmitted at 10/100
		Mbps link		Mbps.
		LED		Mbps.

			Off	No 10/100 Mbps link is present.
			Off	No 10/100 Mbps link is present.

			Steady green	A 1000 Mbps link is present.

			Flashing green	Data is being received or transmitted at 1000 Mbps.

	SFP		Steady yellow	A 10/100 Mbps link is present.

			Flashing yellow	Data is being received or transmitted at 10/100
				Data is being received or transmitted at 10/100
				Mbps.
				Mbps.

			Off	No link is present.

35

Image 39

Contents HP MSR1000 Routers Page Contents Page General safety recommendations Preparing for installationSafety recommendations Safety symbolsExamining the installation site Temperature and humidityCleanness ESD prevention Cooling systemRack-mounting Lightning protectionInstallation accessories Installation checklistRequirements Result Components when observing or moving a removed Requirements Result Installing the router Installation prerequisitesInstallation flowchart Installation flow Installing the router Installing the router in a rackMounting the router on a workbench Marking the positions of cage nuts Page Grounding the router through the rack Grounding the routerGrounding the router through the rack Grounding the router with a grounding strip Installing a SIC Installing an interface moduleRemoving the filler panel Installing a DsicFasten the captive screws to secure the Dsic Connecting interface cablesConnecting a console cable Attaching a USB deviceLogging in through the console port Connection description Setting terminal parametersSetting the serial port used by the HyperTerminal connection HyperTerminal window Verifying before power-on Connecting an AC power cordVerifying the installation Powering on the routerDisplaying boot information Powering on the routerPress Enter, and the following prompt appears Configuring basic settings for the routerExamining the router after power-on You can now configure the routerReplacement procedure Replacing a SICReplacing a Dsic Removing a Dsic No terminal display TroubleshootingPower supply failure System configuration problemsScenario Restoring the factory settingsGarbled terminal display No response from the serial portReset button usage guidelines Following figures are for illustration only Appendix a Chassis views and technical specificationsChassis views MSR1002-4Technical specifications MSR1003-8MSR1002-4 MSR1003-8 MSR1002-4 MSR1003-8 State Description Appendix B LEDsPanel LEDs LED descriptionSERIAL0 Appendix C Slot arrangement Support and other resources Contacting HPRelated information Convention Description ConventionsNetwork topology icons E G I L M N P R S T V W Index

Related manuals

Manual 8 pages 47.39 Kb