HP MSR1000 Router manual Attaching a USB device, Logging in through the console port

Page 23

Figure 17 Connecting the router to a PC

Attaching a USB device

CAUTION:

•Attach only HP-certified USB devices.

•To avoid data loss and hardware damage, do not remove a USB device when it is transmitting data.

•The USB port does not support hot-swapping of Sierra Wireless's USB modems.

To attach a USB device:

1.Remove the protective cap from the USB device.

2.Correctly orient the USB device and plug the connector of the USB device to the USB port.

Figure 18 Attaching a USB device

Logging in through the console port

Connecting a console cable

IMPORTANT:

When you connect a PC to a powered-on router, connect the RJ-45 connector to the router after connecting the DB-9 connector of the console cable to the PC.

To connect a console cable:

1.Plug the DB-9 female connector to the serial port of the configuration terminal.

19

Image 23

Contents HP MSR1000 Routers Page Contents Page General safety recommendations Preparing for installationSafety recommendations Safety symbolsCleanness Examining the installation siteTemperature and humidity ESD prevention Cooling systemRack-mounting Lightning protectionRequirements Result Installation accessoriesInstallation checklist Components when observing or moving a removed Requirements Result Installation flowchart Installing the routerInstallation prerequisites Installation flow Mounting the router on a workbench Installing the routerInstalling the router in a rack Marking the positions of cage nuts Page Grounding the router through the rack Grounding the routerGrounding the router through the rack Grounding the router with a grounding strip Installing a SIC Installing an interface moduleRemoving the filler panel Installing a DsicFasten the captive screws to secure the Dsic Connecting interface cablesLogging in through the console port Connecting a console cableAttaching a USB device Connection description Setting terminal parametersSetting the serial port used by the HyperTerminal connection HyperTerminal window Verifying before power-on Connecting an AC power cordVerifying the installation Powering on the routerDisplaying boot information Powering on the routerPress Enter, and the following prompt appears Configuring basic settings for the routerExamining the router after power-on You can now configure the routerReplacing a Dsic Replacement procedureReplacing a SIC Removing a Dsic No terminal display TroubleshootingPower supply failure System configuration problemsScenario Restoring the factory settingsGarbled terminal display No response from the serial portReset button usage guidelines Following figures are for illustration only Appendix a Chassis views and technical specificationsChassis views MSR1002-4MSR1002-4 MSR1003-8 Technical specificationsMSR1003-8 MSR1002-4 MSR1003-8 State Description Appendix B LEDsPanel LEDs LED descriptionSERIAL0 Appendix C Slot arrangement Related information Support and other resourcesContacting HP Convention Description ConventionsNetwork topology icons E G I L M N P R S T V W Index

Related manuals

Manual 8 pages 47.39 Kb