Sterling SDA AP-1 specifications Shipping Info, Unpacking and Inspection, Event of Shipping Damage

Page 2

Shipping Info

Unpacking and Inspection

You should inspect the large dehumidifying dryer for possible shipping damage.

Thoroughly check the equipment for any damage that might have occurred in transit, such as broken or loose wiring and components, loose hardware and mounting screws, etc.

In the Event of Shipping Damage

According to the contract terms and conditions of the Carrier, the responsibility of the Shipper ends at the time and place of shipment.

Notify the transportation company’s local agent if you discover damage.

Hold the damaged goods and packing material for the examining agent’s inspection. Do not return any goods before the transportation company’s inspection and authorization.

File a claim with the transportation company. Substantiate the claim by referring to the agent’s report. A certified copy of our invoice is available upon request. The original Bill of Lading is attached to our original invoice. If the shipment was prepaid, write us for a receipted transportation bill.

Advise customer service regarding your wish for assistance and to obtain an RMA (return material authorization) number.

If the Shipment is Not Complete

Check the packing list as back-ordered items are noted on the packing list. You should have:

;Large Dehumidifying Dryer

;Bill of lading

;Packing list

;Operating and Installation packet

;Electrical schematic and panel layout drawings

;Component instruction manuals

Re-inspect the container and packing material to see if you missed any smaller items during unpacking.

If the Shipment is Not Correct

If the shipment is not what you ordered, contact the parts and service department immediately at [262] 641-8610. Have the item and order numbers ready. Hold the items until you receive shipping instructions.

Large Dehumidifying Dryers

ii

Image 2

Contents SDA Large AP-1 Control Dehumidifying Dryer Event of Shipping Damage Shipping InfoUnpacking and Inspection If the Shipment is Not CompleteReturns Table of Contents Operation Troubleshooting Safety Symbols Used in this Manual SafetyHow to Use This Manual Dryer Safety Tags Description Operator Responsibility ResponsibilityGeneral Responsibility Maintenance Responsibility Reporting a Safety Defect General Description Functional DescriptionModels Covered in This Manual Process/Regeneration Cycle Sequence of OperationMechanical Features Standard FeaturesAuto Start Timer Electrical FeaturesClosed-Loop Regeneration OptionsDewpoint Extend Drawings and Diagrams Optional dryer dust collector Process Air Dust Collector Aftercooler Design SpecificationsProcess Aftercooler Process Air Dust Collector Recommended Temperature Settings Material Overdrying ProtectionController Options Mechanical OptionsElectrical Options Safety Device Lock-Outs Safety Devices and InterlocksSafety Circuit Standards Fail Safe OperationPage Dimensions and Specifications Denotes availability Mechanical Options Denotes availabilityDenotes availability Rigging and Placing Unit Mechanical InstallationUncrating the Equipment Making Electrical ConnectionsMaking Gas Line Connections Gas-Fired Models Only DescriptionChecking for Proper Blower Rotation Checking Blower RotationMaking Dryer/Drying Hopper Process Air Connections Dryer/Drying Hopper Process Air ConnectionsProcess Air Heater on Drying Hopper Large Dehumidifying Dryers Mechanical Installation Connecting Aftercooler/Precooler Cooling Water Optional Aftercooler Components & Flow RatesUsing the Drying Hopper Air Trap Drying Hopper Air TrapControls Controller DescriptionProcess Air Temperature and Conveying Process Controller Dryer Status Screen Startup ScreenMain Menu Screen Dryer Alarms Help System LOG OFFIdentifying Controller Screens Setting Values Auto Start Main Menu Dryer Status Dryer Setup Over DRY Protect Alarms Auto TuneDryer Menu Dryer Setup Screen 4 Dryer Setup Screen 2Dryer Setup Screen 3 Overdry Protection Screen 2 Overdry ProtectionOverdry Protection Screen 1 Process AutoTune Screen Alarm History ScreenAutotune Autostart Timer Screen DEW Point SetupDew Point Setup Screen Auto StartHelp Menu Screen System Setup SET Clock Hour Meters Alarm History StatusHelp Menu System MenuLOW Level Detection Setup System Backup Service Menu Main Menu System SetupSystem Setup Screen Clock Menu Screen Autostart Clock ScreenInput Status Screen Hour Meter ScreenInput Status Output StatusService Menu Screen System Backup ScreenService Alarm Screens Redundant Safety Controller Display Alarm Screen ExampleSetting the Redundant Safety Controller Always put your set point to 30F above set pointLarge Dehumidifying Dryers Controls Operation Start-upUsing the Dryer Status Screen Alarms Alarm DescriptionsShutdown Photocopy this page for your maintenance records MaintenanceMaintenance Schedule Preventative Maintenance Cleaning or Replacing the Process Air FiltersCleaning or Replacing the Regeneration Filter Calibrating the Dirty Filter AlarmChecking the Dewpoint Control System Replacing the Desiccant Corrective MaintenanceSymptoms of Worn Out Desiccant Desiccant Tower Assembly Replacing the Process Heater Electric DryersProcess Heater Box Assembly Replacing the Regeneration Heater Electric DryersRegeneration Heater Box Assembly Introduction TroubleshootingBasic Troubleshooting Large Dehumidifying Dryers Troubleshooting Using a Platinum Resistance Thermometer Determining Temperature Controller Errors or Sensor ErrorsUsing a Thermocouple Returned Material Policy Warranty ReturnsAppendix Credit ReturnsTechnical Specifications Annex B InformationSpare Parts List Level 3 Mechanical Components Dryer Identification Serial Number Tag Located on back of DryerParts Department Service DepartmentTechnical Assistance Sales Department