Copyright, Warranty | HP Broadband Service Analyzer specification

Copyright	© Hewlett-Packard Australia Ltd 1997
		All rights reserved.
Notice		The information contained in this document is subject to change without notice.
		TO THE EXTENT ALLOWED BY LOCAL LAW, HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND
		WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
		MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
		To the extent allowed by local law, Hewlett-Packard shall not be liable for errors contained herein or for
		incidental or consequential damages in connection with the furnishing, performance, or use of this
		material.
Warranty		A copy of the specific warranty terms applicable to your product and replacement parts can be obtained
		from your local Sales and Service Office.
Printing history		New editions of this guide are issued to reflect extensive changes made to the application. Revisions may
		be issued between application versions to correct errors in the manual. There may not be a new edition
		issued in conjunction with every application version release. The application version at the date of
		printing is noted in the following table.
		Manual Name:	Setting Up the 25.6 Mb/s Interface Pod
		Manual Part Number:	E5129-90001
		Product Model Number: HP E5129A
		Edition	Printing Date	Application Version
		1	October 1997	A.02.0

Visit the Broadband Service Analyzer web site at http://www.hp.com/go/atmanalyzer

Product support	Hewlett-Packard Australia Ltd
	Communications Measurements Division Australia
	PO Box 221
	Blackburn, 3130
	Victoria, Australia

We want to hear from you. If you have any comments, questions, or suggestions about our documentation or support, send them to:

Email: cmd-a_support@aus.hp.com

Fax: +61 3 9210 5570

Phone: +61 3 9272 8633

Printed in Australia

Copyright