HP Broadband Service Analyzer manual Contents

Page 3

Contents
Guide to the Broadband Service Analyzer Documentation	..........................iv
About the 25.6 Mb/s Interface Pod	1
Online Help	2
To Access User Online Help	2
Front Panel at a Glance	3
Cable and Line Connector Details	4
Connector Cable Configurations	5
To Set Up the Interface Pod	6
To Insert the Interface Pod	7
To Remove the Interface Pod	8
To Connect to the System Under Test	8
Automatic Configuration Parameters	10
To Manually Configure the Interface Pod	11
What to Do Next	12
Standards and Specifications	13
Communications Standards	13
Physical Specifications	13
Environmental Specifications	14

iii

Image 3

Contents Broadband Service Analyzer Setting Up 25.6 Mb/s Interface PodProduct support WarrantyCopyright Printing historyContents What is it? What does it do? About the 25.6 Mb/s Interface Pod To Access User Online Help Online HelpOnline Help Access Signal Concentrator Front Panel at a GlanceFront Panel at a Glance Cable and Line Connector Details Cable and Line Connector DetailsInterface Pod User Device Connector Cable ConﬁgurationsConnector Pin SignalTo Set Up the Interface Pod To Set Up the Interface PodTo Insert the Interface Pod To Connect to the System Under Test To Remove the Interface PodTo Set Up the Interface Pod See also Automatic Conﬁguration ParametersTo Manually Conﬁgure the Interface Pod Click to set the configurationWhat to Do Next X8 Timing Marker Source SettingFill Cell Filter Setting What to Do NextStandards and Speciﬁcations Communications StandardsPhysical Speciﬁcations Altitude Environmental SpeciﬁcationsParameter Nominal Min Max HumidityRestricted Rights Legend Certification WarrantyLimitation of Warranty Exclusive RemediesSafety Symbols Do not clean with fluidsAvertissement Service et ajustementService non autorisé Symboles des sécuritéDeclaration of Conformity