Roberts Gorden Linear Heater manual Coupling and Tube Assembly, Tube Length, Model

SECTION 6: HEATER INSTALLATION

Step 6.3.1 Coupling and Tube Assembly (Continued)

Tighten slide bar as shown below.

	Drive slide bar until tight.
	End of slide bar should be
	within tolerance listed below.
	± 2" (5 cm)
Correct slide bar	Incorrect slide bar
dimensions
	position

• Repeat Step 6.3 A - D until all tubes are assembled. See Page 19, Step 6.3.2.

Step 6.3.2 Coupling and Tube Assembly (Continued)

7' 6" ± 1' (2.3 m ± .25 m)

10' ± 1'

(3 m ± .25 m)

	Tube Length
Model	Minimum
BH-40	10' (3 m)
BH-60	20' (6 m)
BH-80	20' (6 m)
BH-100	30' (9 m)
BH-115	30' (9 m)
BH-125	40' (12 m)
BH-140	40' (12 m)
BH-150	50' (15 m)
BH-175	50' (15 m)
BH-200	60' (18 m)

Total Overall Tube Length

19