Toshiba RAV-SM1106BT-E, RAV-SM406BT-TR, RAV-SM1406BT-E Central, Goes on, Values of various sensors

No.	Item		Outline of specifications	Remarks
14	Central control	1)	Setting at the central controller side enables to select
	mode selection		the contents which can be operated on the wired
			remote controller.
		2)	Setup contents

•In case of TCC-LINK Central remote controller (TCB-SC642TLE2)

[Individual]:

Operated by wired remote controller	Display at wired remote
([After-push precedence])	controller side (No display)
[Central 1]:
	[	] goes on.
START / STOP operation by wired remote controller
is unavailable.
[Central 2]:	[	] goes on.
START / STOP, MODE change and TEMP. setting by
wired remote controller are unavailable.
[Central 3]:	[	] goes on.
MODE change and TEMP. setting by wired remote
controller are unavailable.
[Central 4]:	[	] goes on.
MODE change by wired remote controller is
unavailable.

•In case of the wireless remote controller, the con- tents to be operated are same though the display lamp does not change.

If an item prohibited by the central control mode is operated from the remote controller, it is notified with receiving sound Pi, Pi, Pi, Pi, Pi (5 times)

15	Energy-saving	1)	Selecting [AUTO] mode enables an energy-saving to
	control		be operated.
		2)	The setup temperature is shifted (corrected) in the
			range not to lose the comfort ability according to input
			values of various sensors.
		3)	Data (Input value room temp. Ta, Outside temp. To, Air
			volume, Indoor heat exchanger sensor temp. Tc) for
			20 minutes are taken the average to calculate correc-
			tion value of the setup temperature.
		4)	The setup temperature is shifted every 20 minutes,
			and the shifted range is as follows.
			In cooling time: +1.5 to – 1.0K
			In heating time: –1.5 to +1.0K.
16	Max. frequency	1)	This control is operated by selecting [AUTO] operation mode.
	cut control	2)	COOL operation mode:	3) HEAT operation mode:
			It is controlled according to the following	It is controlled according to the following
			figure if To < 28°C.	figure if To > 15°C.
					Max. frequency is
			Ta ˚C	Ta ˚C	restricted to approximately
			Normal control		the rated heating frequency
			+4	Tsh
			+3	–3
			Tsc	–4
			Max. frequency is	Normal control
			restricted to approximately
			the rated cooling frequency

– 31 –