Toshiba RAV-SP240AT2-UL „ Installation of Outdoor Unit, Barriers in front and back of unit

Page 11

Outdoor Unit

Barriers in front and back of unit

Open above and to the right and left of the unit.

The height of an barrier in both the front and rear of the unit, should be lower than the height of the outdoor unit.

▼Standard installation

1. Single unit installation

39.4” (1000) 5.9” (150) or more or more

2.Multiple unit installation

a. Intake and supply parallel

Installation Manual

„Installation of Outdoor Unit

•Before installation, check the strength and horizontal of the base so that abnormal sounds do not emanate.

•According to the following base diagram, fix the base firmly with the anchor bolts.

(Anchor bolt, nut: 3/8” (M10) x 4 pairs)

 

 

Drain hole

20.7” (525)

5.9” (150)

 

5.9” (150)

 

 

 

23.6” (600)

 

 

 

 

 

 

 

 

1.8” (45)

 

15.8” (400)

14.4” (365)

 

 

 

Drain

nipple mounting hole Drain hole

11.8” (300) or more

11.8” (300) or more

39.4” (1000) 7.9” (200) or more or more

1)Field fabricate a snow or an ice stand for the unit using the above dimension.

2)Place snow or ice stand on a foundation/pad and secure it to the foundation/pad and secure it to the foundation/pad by anchor bolts.

NOTE

When the outdoor unit is anchored directly on the foundation/pad (cooling only protrude a minimum of 6” (15 mm)).

b.Intake and supply in line

Open above and to the right and left of the unit. The height of an obstacle in both the front and rear of the unit should be lower than the height of the outdoor unit.

▼Standard installation

39.4”

11.8”

59.1”

78.7”

7.9”

(1000)

(300) or

(1500)

(2000)

(200)

or more

more

or more

or more

or more

0.6” (15 mm) or less

EN

– 10 –

10-EN

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation manual Contents Dimension Hand this directly to the customer Accessory PartsPart name ’ty Shape Usage Installation manual „ Piping Field supplied System RequirementsBe sure to ground the equipment Precautions for SafetyEquipment Damage Hazard Tools/equipment Use Installation of NEW Refrigerant AIR Conditioner„ Required Tools/Equipment and Precautions for Use New Refrigerant Air Conditioner InstallationExample „ Installation LocationDo not install the outdoor unit in the following location Upper side is free Above unit is free „Required ClearancesUnit in mm Barrier at rear side Barrier in frontBarriers in front and back of unit „ Installation of Outdoor UnitStandard installation Installation Manual5pcs Drain nippleFlaring diameter size a Unit in mm Refrigerant PipingFlaring Projection margin in flaring B Unit in mm Rigid Clutch typeOuter diameter of copper pipe Tightening torque „ Tightening of Flare ConnectionsDo not apply refrigerant oil to the flared surface Valve at liquid sideElectrical Connections „ Field wiring„ Wiring Attach the front pipe cover with 4 screws Triple Evacuation Method Using Vacuum PumpEvacuate and Dehydrate the System Deep Vacuum MethodLiquid side Open service valvesValve handling precautions Final Tubing Check10TEST RUN 11PERIODIC MaintenanceFinishing Verifying Fault code status Outdoor control board 12TROUBLESHOOTINGD800 D801 D802 D803 D804 D805 13UNIT Pump Down 14POWER SaveProcedure EH99865401

RAV-SP240AT2-UL specifications

The Toshiba RAV-SP240AT2-UL is a state-of-the-art air conditioning unit that showcases Toshiba's commitment to energy efficiency, innovation, and comfort. Designed primarily for commercial use, it stands out as an ideal solution for businesses that require a reliable and effective climate control system.

One of the main features of the RAV-SP240AT2-UL is its powerful 24,000 BTU cooling capacity, which allows it to effectively cool larger spaces. This unit functions efficiently even in extreme weather conditions, providing optimal performance regardless of outside temperatures. The RAV-SP240AT2-UL also boasts a heating capacity, making it a versatile option for year-round climate control.

Energy efficiency is a significant characteristic of this model, as it comes equipped with an advanced inverter technology. This technology allows the unit to adjust its cooling and heating output according to the specific requirements of the space. As a result, users can expect lower energy consumption, reduced electricity bills, and a lower carbon footprint. The RAV-SP240AT2-UL has a high Energy Efficiency Ratio (EER) rating that further underscores its energy-saving capabilities.

In terms of installation, the RAV-SP240AT2-UL is designed for easy integration. Its compact size and lightweight design make it suitable for various commercial settings, including offices, retail spaces, and restaurants. The unit can be installed in both horizontal and vertical configurations, providing flexibility to meet the unique layout of any building.

The Toshiba RAV-SP240AT2-UL also includes advanced filtration systems that enhance indoor air quality. Its multi-stage air filtration process removes dust, allergens, and other particulates, ensuring a healthier environment for occupants. Additionally, the unit operates at a low noise level, providing a quiet atmosphere that enhances the comfort of any space.

Another notable technology featured in the RAV-SP240AT2-UL is the Smart Control system, which allows users to monitor and manage their air conditioning remotely. This feature adds convenience and flexibility, enabling businesses to optimize their energy use and maintain a comfortable environment, even from a distance.

Overall, the Toshiba RAV-SP240AT2-UL is a robust and efficient air conditioning solution tailored for commercial spaces. With its blend of power, energy efficiency, and advanced technology, it ensures an optimal climate control experience while promoting sustainability.
Top Page Image Contents