HP XA manual System Board Switches, Switch Switch Function Default, Closed, Open

2 System Board

Devices on the ISA Bus

System Board Switches

The first two of the system board switches set the frequency of the Processor-Local bus, and the next three the ratio of processor-frequency to Processor-Local-bus-frequency, as summarized on page 37.

The next five switches set the configuration for the PC Workstation, as summarized in the table below.

Switch		Switch Function	Default
1	Open	Reserved - Do not use (always set to Open).	Open
2 - 5	-	Bus Frequencies (see the table on page 37).	-
		Retain or clear the CMOS configuration stored in serial EEPROM:
6	Open	Do not clear CMOS.
		Clear CMOS and reload default values in Setup.	Open
	Closed
		Enable or disable User and System Administrator Passwords stored in
		EEPROM:
7	Open	Enable passwords.
		Disable /Clear User and Administrator passwords.	Open
	Closed
		Keyboard power-on:
8	Open	Disable keyboard power on.
	Closed	Enable keyboard power on.	Closed
		Boot block:
9	Open	Idle. Normal operation
			Open
	Closed	Recovery boot active. Enable crisis recovery.
10	Open	Reserved = do not use	Open

48